投稿指南
来稿应自觉遵守国家有关著作权法律法规,不得侵犯他人版权或其他权利,如果出现问题作者文责自负,而且本刊将依法追究侵权行为给本刊造成的损失责任。本刊对录用稿有修改、删节权。经本刊通知进行修改的稿件或被采用的稿件,作者必须保证本刊的独立发表权。 一、投稿方式: 1、 请从 我刊官网 直接投稿 。 2、 请 从我编辑部编辑的推广链接进入我刊投审稿系统进行投稿。 二、稿件著作权: 1、 投稿人保证其向我刊所投之作品是其本人或与他人合作创作之成果,或对所投作品拥有合法的著作权,无第三人对其作品提出可成立之权利主张。 2、 投稿人保证向我刊所投之稿件,尚未在任何媒体上发表。 3、 投稿人保证其作品不含有违反宪法、法律及损害社会公共利益之内容。 4、 投稿人向我刊所投之作品不得同时向第三方投送,即不允许一稿多投。 5、 投稿人授予我刊享有作品专有使用权的方式包括但不限于:通过网络向公众传播、复制、摘编、表演、播放、展览、发行、摄制电影、电视、录像制品、录制录音制品、制作数字化制品、改编、翻译、注释、编辑,以及出版、许可其他媒体、网站及单位转载、摘编、播放、录制、翻译、注释、编辑、改编、摄制。 6、 第5条所述之网络是指通过我刊官网。 7、 投稿人委托我刊声明,未经我方许可,任何网站、媒体、组织不得转载、摘编其作品。

石墨烯基超疏水材料制备及其应用研究进展(7)

来源:中国表面工程 【在线投稿】 栏目:期刊导读 时间:2021-05-08
作者:网站采编
关键词:
摘要:(3)建立超疏水表面统一的测试及评价体系.超疏水表面除了以共性的水接触角、滚动角来评价外,在涂层机械强度,涂层与基体的结合强度等方面测试、

(3)建立超疏水表面统一的测试及评价体系.超疏水表面除了以共性的水接触角、滚动角来评价外,在涂层机械强度,涂层与基体的结合强度等方面测试、评价的标准不一,这直接导致同一研究方向的不同文献缺乏可比性参数的现象发生. 同时,评价体系的建立也有助于今后超疏水表面向商业化发展.

[1]Feng L, Li S H, Li Y S, et al. Super-hydrophobic surfaces: From natural to Mater, 2002, 14(24): 1857

[2]Barthlott W, Neinhuis C. Purity of the sacred lotus, or escape from contamination in biological , 1997, 202(1): 1

[3]Autumn K, Liang Y A, Hsieh S T, et al. Adhesive force of a single gecko , 2000, 405(6787): 681

[4]Parker A R, Lawrence C R. Water capture by a desert , 2001, 414(6859): 33

[5]Gao X F, Jiang L. Biophysics: water-repellent legs of water , 2004, 432(7013): 36

[6]Wen G, Guo Z G, Liu W M. Biomimetic polymeric superhydrophobic surfaces and nanostructures: From fabrication to , 2017, 9(10): 3338

[7]Latthe S S, Sutar R S, Kodag V S, et al. Self-cleaning superhydrophobic coatings: Potential industrial Org Coat, 2019, 128: 52

[8]Bai X G, Shen Y Q, Tian H F, et al. Facile fabrication of superhydrophobic wood slice for effective water-in-oil emulsion Purif Technol, 2019, 210: 402

[9]Cui M K, Mu P, Shen Y Q, et al. Three-dimensional attapulgite with sandwich-like architecture used for multifunctional water Purif Technol, 2020, 235:

[10]He Z K, Ma M, Xu X C, et al. Fabrication of superhydrophobic coatingviaa facile and versatile method based on nanoparticle Surf Sci, 2012, 258(7): 2544

[11]Feng L B, Che Y H, Liu Y H, et al. Fabrication of superhydrophobic aluminium alloy surface with excellent corrosion resistance by a facile and environment-friendly Surf Sci, 2013, 283: 367

[12]Wang B, Guo Z G. Superhydrophobic copper mesh films with rapid oil/water separation properties by electrochemical deposition inspired from butterfly Phys Lett, 2013, 103(6):0

[13]Liu Y, Yin X M, Zhang J J, et al. Biomimetic hydrophobic surface fabricated by chemical etching method from hierarchically structured magnesium alloy Surf Sci, 2013, 280:845

[14]Liu F, Wang S L, Zhang M, et al. Improvement of mechanical robustness of the superhydrophobic wood surface by coating PVA/SiO2composite Surf Sci, 2013, 280: 686

[15]Park E J, Sim J K, Jeong M G, et al. Transparent and superhydrophobic films prepared with polydimethylsiloxanecoated silica Adv, 2013, 3(31):

[16]Liu X M, He J H. One-step hydrothermal creation of hierarchical microstructures toward superhydrophilic and superhydrophobic , 2009, 25(19):

[17]Zheng Y S, He Y, Qing Y Q, et al. Formation of SiO2/polytetrafluoroethylene hybrid superhydrophobic Surf Sci, 2012, 258(24): 9859

[18]Ji S, Ramadhianti P A, Nguyen T B, et al. Simple fabrication approach for superhydrophobic and superoleophobic Al Eng, 2013, 111: 404

[19]Tong W, Xiong D S. Bioinspired superhydrophobic materials:Progress and functional Inorg Mater, 2019, 34(11):1133

(佟威, 熊党生. 仿生超疏水表面的发展及其应用研究进展. 无机材料学报, 2019, 34(11):1133)

[20]Geim A K. Graphene: status and , 2009,324(5934): 1530

[21]Young T. An essay on the cohesion of Trans R Soc London, 1805, 95: 65

[22]Wenzel R N. Resistance of solid surfaces to wetting by Faraday Soc, 1936, 28(8): 988

[23]Oner D, McCarthy T J. Ultrahydrophobic surfaces: Effects of topography and length scales on , 2000,16(20): 7777

[24]Li H J, Wang X B, Song Y L, et al. Super-"Amphiphobic" aligned carbon nanotube Chem, 2001, 113(9): 1793

[25]A J, S Jayan J S, Saritha A, et al. Superhydrophobic graphenebased materials with self-cleaning and anticorrosion performance:An appraisal of neoteric advancement and future Surf A, 2020, 606:

[26]Chen Z X, Dong L, Yang D, et al. Superhydrophobic graphenebased materials: Surface construction and functional Mater, 2013, 25(37): 5352

[27]Nguyen-Tri P, Tran H N, Plamondon C O, et al. Recent progress in the preparation, properties and applications of superhydrophobic nano-based coatings and surfaces: A Org Coat, 2019,132: 235

[28]Hooda A, Goyat M S, Pandey J K, et al. A review on fundamentals, constraints and fabrication techniques of superhydrophobic Org Coat, 2020, 142:

[29]Dalawai S P, Aly M A S, Latthe S S, et al. Recent advances in durability of superhydrophobic self-cleaning technology A critical Org Coat, 2020, 138:

[30]Liu H D, Ying Q, Jia F, et al. Preparation and characterization of surperhydrophobic foam modified by graphene Mater Sci Eng, 2016, 32(4): 115

(刘海东, 应琴, 贾飞, 等. 石墨烯改性聚氨酯超疏水泡沫的制备与表征. 高分子材料科学与工程, 2016, 32(4):115)

[31]Mo Z H, Luo Z, Huang Q, et al. Superhydrophobic hybrid membranes by grafting arc-like macromolecular bridges on graphene sheets: Synthesis, characterization and Surf Sci, 2018, 440: 359

文章来源:《中国表面工程》 网址: http://www.zgbmgc.cn/qikandaodu/2021/0508/591.html



上一篇:华南理工大学发挥专业技术优势破解企业技术难
下一篇:三种擦拭方法对放射治疗固定装置表面处置效果

中国表面工程投稿 | 中国表面工程编辑部| 中国表面工程版面费 | 中国表面工程论文发表 | 中国表面工程最新目录
Copyright © 2019 《中国表面工程》杂志社 版权所有
投稿电话: 投稿邮箱: